LTGS350K-06-1
HOME / Induction heater / LTGS Heater / LTGS350K-06-1

LTGS350K-06-1

  • Category: Induction heater
  • Type: LTGS350K-06-1
  • Can do small workpiece forging, quenching, welding, etc.

Information

Made in Taiwan
The panel function has a four-stage heating mode, and each stage of heating power and time can be individually set and stored.

Specification

Model LTGS350K-06-1
Input voltage 220VAC (± 15%) single phase
Input power 6KVA
Oscillation frequency 250-450KHz
Output voltage AC 600 VOLT max
Cooling water flow 3L/MIN, 2.5Kg-cm² (35psi)
Host protection module DC overcurrent protection
AC overcurrent protection
Under-phase protection
Input overvoltage protection
Output overvoltage protection
Underwater protection
Over temperature protection
Lead-out line Start/stop signal (3 WIRE)
Machine operation signal (3 WIRE, NO & NC FOR PLC)
DC 0~5V control power (optional)
RS-232 (FOR PLC, PDA, COMPUTER..) power control (optional)
Temperature control (optional)
Estimated weight

Host: 20KG

Estimated size Host: 38CM (depth), 43CM wide, 15CM high

Optional

  • Digital temperature controller: with 25mS sampling speed, PID temperature control, automatic logic calculation and optional RS-232 digital interface.
  • Infrared non-contact temperature probe: The temperature range is shown in the table below. There are four probes available.
  • Probe: 40~975° C, 100~600° C, 250~800° C, 385~1

More Products

LT-10-1000
LT-10-1000
LTGS500K-06-2
LTGS500K-06-2
LTGS900K-06-3
LTGS900K-06-3
LT-5-30感應加熱機
LT-5-30感應加熱機
LT-5-1000超高頻頻感應加熱器
LT-5-1000超高頻頻感應加熱器
LT-2-600感應加熱機
LT-2-600感應加熱機